aluminum electrolytic capacitors hz series ultra low impedance, for pc motherboard lower impedance than hn series. compliant to the rohs directive (2002/95/ec). please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. hz hn low impedance ltem performance characteristics 6.3 to 16v 20% (120hz, 20?c) printed with gold color letter on black sleeve. rated voltage range rated capacitance range capacitance tolerance leakage current stability at low temperature endurance marking radial lead type type numbering system (example : 6.3v 1800 f) specifications rated voltage (v) rated voltage (v) tan (max.) 6.3 6.3 3 0.22 10 10 3 0.19 16 16 3 0.16 120hz 20?c 120hz impedance ratio zt / z20 (max.) z 25?c / z + 20?c standard ratings 470 680 820 1000 1200 1500 1800 2200 2700 3300 471 681 821 102 122 152 182 222 272 332 8 15 10 12.5 8 15 10 12.5 8 20 10 16 10 16 8 20 10 16 10 20 10 20 10 25 14 12 14 12 9 10 10 9 10 7 7 6.5 2210 2280 2210 2280 2880 2960 2960 2880 2960 3770 3770 4690 case size d l (mm) rated ripple (marms) 105?c / 100khz impedance (m ? ) max. 20 ?c / 100khz 6.3 (0j) 10 12.5 10 12.5 10 12.5 10 16 8 20 10 16 10 16 8 20 10 20 10 25 12 12 12 10 9 10 10 9 7 6.5 2288 2280 2280 2960 2880 2960 2960 2880 3770 4140 case size d l (mm) rated ripple (marms) 105?c / 100khz impedance (m ? ) max. 20 ?c / 100khz 10 (1a) v (code) item cap. ( f) 10 12.5 10 12.5 8 20 10 16 10 16 10 16 8 20 10 20 10 20 10 20 10 25 12 12 9 10 10 10 9 7 7 7 6.5 2280 2280 2880 2960 2960 2960 2880 3770 3770 3770 4140 case size d l (mm) rated ripple (marms) 105?c / 100khz impedance (m ? ) max. 20 ?c / 100khz 16 (1c) code tangent of loss angle (tan ) d p d 8 3.5 0.6 10 5.0 0.6 p 0.5 l + 1.5 m a x . 15 min 4 min d + 0.5 max. pressure relief vent d u 1 h 2 z 3 0 4 j 5 1 6 8 7 2 8 m 9 p 10 m 11 12 configuration size code capacitance tolerance ( 20%) rated capacitance (1800 f) rated voltage (6.3v) series name type 470 to 3300 f after 2 minutes' application of rated voltage, leakage current is less than 0.03cv category temperature 25 to +105?c for capacitance of more than 1000 f, add 0.02 for every increase of 1000 f : in this case, n will be put at 12th digit of type numbering system. : in this case, c will be put at 12th digit of type numbering system. : in this case, . will be put at 12th digit of type numbering system. sleeve (p.e.t.) d 8 ? 10 pb-free leadwire pb-free pet sleeve pm configuration (mm) capacitance change within 30% of the initial capacitance value tan 200% or less than the initial specified value leakage current less than or equal to the initial specified value the specifications listed at right shall be met when the capacitors are restored to 20 ?c after d.c. bias plus rated ripple current is applied for 2000 hours at 105 ?c , the peak voltage shall not exceed the rated voltage. cat.8100a-1 products which are scheduled to be discontinued. not recommended for new designs
|
